Entries by administrator

,

PORTABLE LIPO CHARGING STATION: HOW TO CHARGE IN THE FIELD

When I started this hobby the thing that shocked me the most was how short flight times were. 5 minutes??? Sometimes more. Sometimes less. To make matters worse, most people drive to a park or a field where they don’t have access to electricity to recharge their batteries. Yes, you can buy a couple dozen […]

,

PUFFED LIPO BATTERY: WHY THEY SWELL AND WHAT TO DO ABOUT IT

Anybody who uses lipos will eventually encounter a puffy or swollen battery. And the first question that inevitably comes up is “What should I do?” This post is all about what causes that swelling and what to do when it happens to one of your lipos. Are Swollen Lipo Batteries Dangerous? Yes. Next question. Seriously, […]

,

Which battery is used in Bluetooth headsets?

Compared with ordinary earphones, the battery life and battery life of Bluetooth headsets are relatively short when you keeping connect with Bluetooth. In addition, the Bluetooth headsets currently on the market have made the size smaller and handy to adapt the needs of market users for portability and appearance. Therefore, we have to extend the battery life, […]

, ,

What is a Battery Management System (BMS)?

The power output depends on the battery, and the battery management system (BMS) is the core of it. It is a system for monitoring and managing the battery. It controls the charge and discharge of the battery by collecting and calculating parameters such as voltage, current, temperature, and SOC. The process, the management system that […]

,

Battery Pack Cell Voltage Difference And Solution Part 2

We have introduced voltage difference in battery packs and used it as an important criterion for measuring the quality of batteries.  At this time, we’ll review how to prevent voltage difference. Match the cells The best method in preventing cell voltage difference is to match the cells before the battery pack is assembled and to select the cells […]

,

Features Of Pouch Cell Battery

Introduction One of the differences between pouch cell batteries and other batteries is the material of the casing. Cylindrical batteries have a hard casing, which are made of nickel and steel or aluminum alloy. A pouch cell on the other hand consists of many types of layers to form a multilayer film consisting of an outer layer, middle layer, and an […]

, ,

How to Keep Solar Batteries Warm in Winter

Note: Most of the information in this article comes from the Solar Living Sourcebook. Sunlight doesn’t just power your solar panels – it heats your batteries. With fewer hours of sunlight per day, winter is the time of year when it’s most important to make sure the energy storage component of an off-grid solar system or grid-tie solar system […]

,

Car Battery Life: When is it Time For a Change?

Car batteries are one of the most important components of any vehicle, yet for some reason, they are often overlooked. Your car needs the electrical charge it gets from the battery to start the engine, which is why you should always be aware of the age and status of the battery in your vehicle. It can […]

,

Application Of Lithium Iron Phosphate (LiFePO4) Battery In The Industrial Field

Lithium iron phosphate battery is a lithium-ion battery that uses lithium iron phosphate (LiFePO4) as the positive electrode material and carbon as the negative electrode material. The rated voltage of the monomer is 3.2V, and the charge cut-off voltage is 3.6V~3.65V. Application of the new energy automobile industry Lithium iron phosphate batteries are widely used in […]