This author has not written his bio yet.
But we are proud to say that administrator contributed 431 entries already.
Learn about the differences within the lead acid family and find out what the cons and pros are. Invented by the French physician Gaston Planté in 1859, lead acid was the first rechargeable battery for commercial use. Despite its advanced age, the lead chemistry continues to be in wide use today. There are good reasons […]
Analyze the pros and cons of other battery systems and learn what the potentials are. The media promotes wonderful new batteries that promise long runtimes, charge in minutes, are paper-thin and will one day power the electric car. While these experimental batteries produce a voltage, the downsides are seldom mentioned. The typical shortcomings are low […]
Find out how NiCd, NiMH and Li-ion perform when put to the test. To compare older and newer battery systems, Cadex tested a large volume of nickel-cadmium, nickel-metal-hydride and lithium ion batteries used in portable communication devices. Preparations included an initial charge, followed by a regime of full discharge/charge cycles at a 1C rate. The following […]
Explore SoC measurements and why they are not accurate. Voltage Method Measuring state-of-charge by voltage is simple, but it can be inaccurate because cell materials and temperature affect the voltage. The most blatant error of the voltage-based SoC occurs when disturbing a battery with a charge or discharge. The resulting agitation distorts the voltage and […]
Learn about storage temperatures and state-of-charge conditions. The recommended storage temperature for most batteries is 15°C (59°F); the extreme allowable temperature is –40°C to 50°C (–40°C to 122°F) for most chemistries. Lead acid You can store a sealed lead acid battery for up to 2 years. Since all batteries gradually self-discharge over time, it is […]
Learn the key feature of each Li-ion in a summary table. The term lithium-ion points to a family of batteries that shares similarities, but the chemistries can vary greatly. Li-cobalt, Li-manganese, NMC and Li-aluminum are similar in that they deliver high capacity and are used in portable applications. Li-phosphate and Li-titanate have lower voltages and have less […]
Learn the unique advantages of lead acid batteries The early gelled lead acid battery developed in the 1950s by Sonnenschein (Germany) became popular in the 1970s. Mixing sulfuric acid with a silica-gelling agent converts liquid electrolyte into a semi-stiff paste to make the gel maintenance free. The AGM that arrived in the early 1980s offers similar performance […]
Intro Internal resistance ( IR ) is an opposition against the current flow in a lithium-ion battery while it is in operation, and it is an important technical index to measure the performance of a battery. A large amount of internal resistance turns a part of the energy into heat. This becomes a factor for the increase in […]
In this issue, we are going to discuss the challenges of Lithium Polymer batteries especially since they suffer from a shorter life if not cared for properly. Luckily, it’s easy to make sure your Lithium Polymers last as long as they should, allowing you to save on money and the hassle. When should you charge? […]
Batteries can release high energies and the safety requirements for nickel- and lithium-based batteries and cells for portable applications are harmonized under IEC 62133. The standard came into effect in 2012 to reduce the global risk in transporting, storing and operating batteries. The most basic safety device in a battery is a fuse that […]
